Torque AnalyzersTorque ScrewdriversAssembly Power ToolsTorque WrenchesTorque MultipliersBits, Adapters & ScoketsMountz Home Page Catalog RequestContact UsTechnical SupportCompany Information PageMountz Service & Calibration Services
Dial Measuring Wrenches

Adapters offer alternative solution for overcoming space and access limitations and are available upon request.

1. Place the end fitting to the extension adapter.
2. Then attach to the square drive of the wrench.
3. Measure and note distance “E” from the center
  of the end fitting to the wrench square drive.

16mm Spigot

German 9x12 Cavity Fitting

Dial Wrench Operating Instructions Extension Spanners for Dial WrenchExtension Adapters for Dial WrenchApplication Images for Dial WrenchDial Wrench data sheetDial Wrench Home Page

Dovetail

Sq. Dr.

Item #

Item #

Item #

3/8”

20-A96102

20-A96112

20-A96122

1/2”

20-A96103

20-A96113

20-A96123

Note!
Extension Adapters cannot be used with the ADS4, ADS8, ADS12D.

When using extension spanners or adapters, the torque applied to the fastener is greater than that shown on the torque wrench dial. To calculate the increase, please use this formula.

with an Extension

Mountz, Inc.

1080 N. 11th Street

San Jose, CA 95112

Phone: (408) 292-2214

Fax: (408) 292-2733

©2005 Mountz Inc