Model | Item # | lbf.ft | N.m | Clamp Dia. | Min. Arm Reach | Max. Arm Reach | Weight of Arm |
EZ-12T | 260075 | 8.8 | 12 | 1 - 1.5 | 18.1 | 37 | 1.35 lbs |
EZ-12T/1500 | 260115 | 8.8 | 12 | 1 - 1.5 | 25.6 | 59 | 2.7 lbs |
EZ-12T/2000 | 260116 | 8.8 | 12 | 1 - 1.5 | 32.3 | 78.7 | 3.3 lbs |
EZ-30T | 260076 | 22.1 | 30 | 1 - 2 | 18.7 | 37.5 | 1.5 lbs |
EZ-30T/1500 | 260117 | 22.1 | 30 | 1 - 2 | 25.8 | 59 | 3.3 lbs |
EZ-30T/2000 | 260118 | 22.1 | 30 |
1 - 2 | 32.4 | 78.7 | 4 lbs |
EZ-30T/2500 | 260119 | 22.1 | 30 | 1 - 2 | 39.1 | 98.4 |
4.4 lbs |
Max. Torque
Crafted with lightweight durable carbon fiber the arm
collapses like a telescope.
Easy-to-use, requires little space and doesnt disrupt
production flow.
The effortless handling of the torque arm provides
comfortable tool operation and increased production.
Wall or workbench mountable. Easy to install on moving assembly line (mountable on existing standard rail).
Maintenance free.
Eliminates torque reaction of power tools.
Long arm reach capacity up to 8 ft.
Torque capacity up to 147.5 lbf.ft (200 N.m.)
Perfect for MVI applications.
Universal Adapter included with EZ-12T, 30T, 80T &140T models
High Torque Telescoping Torque Arms
Model | Item # | lbf.ft | N.m | Clamp Dia. | Min. Arm Reach | Max. Arm Reach | Weight of Arm |
EZ-80T/1500 | 260120 | 59 | 80 | 1 - 2 | 28.1 | 59 |
|
EZ-80T/2000 | 260121 | 59 | 80 | 1 - 2 | 34.6 | 78.7 | 7.1 lbs |
EZ-80T/2500 | 260122 | 59 | 80 | 1 - 2 | 41.3 | 98.4 | 7.7 lbs |
EZ-140T/1500 | 260123 | 103.3 | 140 | 1.25 - 2 | 36.5 | 59 | 7.7 lbs |
EZ-140T/2000 |
260124 | 103.3 | 140 | 1.25 - 2 | 46.4 | 78.7 | 8.4 lbs |
EZ-140T/2500 | 260125 | 103.3 | 140 | 1.25 - 2 | 56.2 | 98.4 | 8.8 lbs |
EZ-200T/1500 | 260126 | 147.5 | 200 | * | 37.4 | 59 | 7.7 lbs |
EZ-200T/2000 | 260127 | 147.5 | 200 |
* | 47.2 | 78.7 | 8.4 lbs |
EZ-200T/2500 | 260128 | 147.5 | 200 | * | 57.1 | 98.4 |
8.8 lbs |
Max. Torque
Note!
It is recommended to use a tool balancer with the EZ-12T and EZ-30T models. The telescoping arms should not be used at maximum arm reach on a permanent basis
For Operating Instructions.
Note!
It is recommended to use a tool balancer with the EZ-80T, EZ-140T & EZ-200T models. The telescoping arms should not be used at maximum arm reach on a permanent basis.
*Customer must provide information (Brand & Model) on the tool being used with the arm. The clamp is
custom made to fit the tool being used.
A balancing kit can be mounted on the side of any of the telescoping arms. It allows the arm to be used with pistol grip tools and angle nutrunners (see below for using angle nutrunners with arms).
Balancing Kit for Vertical Mounting
Model | Item # | Balancer | Stroke |
E1 | 260140 | 2.2-4.4 lbs |
63 |
E2 | 260141 | 2.2-5.5 lbs | 78.75 |
E3 | 260142 | 4.4-8.8 lbs | 78.75 |
E4 | 260143 |
8.8-13.2 lbs | 78.75 |
The image is an example of E1 balancer kit being attached to to a telescoping arm.
Standard Telescoping Torque Arms
Tool Positioning Options
Besides the standard in-line tool mounting position, the telescoping arm can be used with assembly tools in a variety of positions. For some tool positioning options, a different tool clamp needs to be order separately.
EZ-Glider Telescoping Data Sheet
Position | P1: Telescoping Arm with Pistol Tool | P2: Telescoping Arm with Angle Nutrunner | P3:Telescoping Arm with Angle Nutrunner | P4: Telescoping Arm with Angle Nutrunner |
EZ-12T | Yes | No | No | No |
EZ-30T | Yes | Yes | Yes | Yes |
EZ-80T | Yes | Yes | Yes | Yes
|
EZ-140T | Yes | Yes | Yes | Yes |
EZ-200T | Yes | Yes | Yes | Yes |
Standard Tool Balancer needs to be mounted above an in-line tool.
