Features

Accuracy +/- 0.5% of reading from 20% to 100% of full scale.
Accuracy +/- 1% of reading from 10% to 20% of full scale.

Recommended for all hand screwdrivers, wrenches or power tools.

Provides “EZ-Plug & Play” with Mountz Transducers. Features “ARCII” technology, an instant auto-recognition system of the transducer connected to the LTT. 

Selection of six operating modes: (Track, Peak, First Peak, Audit, Torque + Angle, and Tool Test).

Seven units of torque measurements: (ozf.in, lbf.in, lbf.ft, cN.m, N.m, kgf.m, kgf.cm). Two units of force measurements: (lbf and kN)

Features built-in Tool Tests operation.

Includes three PC Windows based software programs:
Mountz Torque Meter Interface Program - for sensor calibrations, meter calibration and tool tests.
Torque Meter Bootloader - for updating the PTT operating systems.
"Excel Add-In" - for Real-Time data collection into an Excel spreadsheet. It also provides statistics calculations.
 
“Flash" memory allows upgrades to be done by the user in the field & internet through the USB port.

Five low-pass filter selections (3000, 2000, 1500, 500 and 200 Hz).

Easy to use menu structure, a six-digit display and connect to an external transducer.

Real Time Clock for time stamping of readings. USB interface to download readings to PC.

High Capacity Li-Ion Batteries for long life (30 hrs with standard transducers and 16 hrs with brushless rotary).

Can connect to most mv/v transducers and can store calibration data for up to 50 non smart torque & force sensors.

The 5VDC capability allows unit to be used with a Brushless Rotary Transducer for testing pulse tools and high RPM tools.

Torque and Angle data is displayed simultaneously when used with Torque and Angle transducers, up to 8000 RPM for angle measurement.

Stores a total of 2500 data points.

Real time graph of torque vs. time using associated PC Windows software.

Features Go / No Go LEDs that illuminate when high or low setting is achieved.

Display Accuracy is better than +/- 0.0625 of reading.