PTT

The new PTT is the next generation of Mountz hand-held torque analyzer. It offers “EZ-Plug & Play” with instant auto recognition with Mountz transducers. The PTT offers tool testing, graphing capabilities and a graphical menu for easy navigation.

Tool Tests & Graphing

The PTT allows you to set up and create tool tests and save the readings so you can export the data to a PC for documentation. It’s the ideal solution for organizing and storing test data for ISO and SPC documentation.

The ability to graph a dynamic rundown allows joint analysis. Great resource to evaluate, create or confirm a torque specification or tool being used in production.

The “Excel Add-in software allow for real-time data collection into an Excel spreadsheet. It also provides statistics calculations like SPC, CP & CPK


	PTT - Item # 072999


	Certified

Supplied with NIST-Traceable
Certification of Calibration


	Standard accessories include: Universal Charger (100 - 240 VAC) USB Cable Mountz Software Programs Protective Cover



	Torque Transducers

Features

System Accuracy +/- 0.5% of reading from 20% to 100% of full scale.
System Accuracy +/- 1% of reading from 10% to 20% of full scale.

Operates with Torque & Force sensors.

Recommended for all hand screwdrivers, wrenches or power tools.

Provides “EZ-Plug & Play” with Mountz Transducers. Features “ARCII” technology, an instant auto-recognition system of the transducer connected to the PTT.

Selection of six operating modes: (Track, Peak, First Peak, Audit, Spindle Audit and Torque + Angle).

Seven units of torque measurements: (ozf.in, lbf.in, lbf.ft, cN.m, N.m, kgf.m, kgf.cm).

Two units of force measurements: (lbf and kN)

Features built-in Tool Tests operation.

Includes three PC Windows based software programs:
Mountz Torque Meter Interface Program - for sensor calibrations, meter calibration and tool tests.
Torque Meter Bootloader - for updating the PTT operating systems.
“Excel Add-In" - for Real-Time data collection into an Excel spreadsheet. It also provides statistics calculations.

“Flash" memory allows upgrades to be done by the user in the field & internet through the USB port.

Five low-pass filter selections (3000, 2000, 1500, 500 and 200 Hz).

Six-digit display. and easy to use menu structure.

Real Time Clock for time stamping of readings.

USB interface to download readings to PC.

High Capacity Li-Ion Batteries for long life (30 hrs with standard transducers and 16 hrs with brushless rotary).

Can connect to most mv/v transducers and can store calibration data for up to 50 non-smart torque sensors.

The 5VDC capability allows unit to be used with a Brushless Rotary Transducer for testing pulse tools and high RPM tools.

Torque and Angle data is displayed simultaneously when used with Torque and Angle transducers, up to 8000 RPM for angle measurement.

Stores a total of 5000 data points.

Real time graph of torque vs. time using associated PC Windows software.

Features a Go / No Go LEDs that illuminate when high or low setting is achieved.

Display Accuracy is better than +/- 0.0625 of reading.


	Note! Since a tester cannot always duplicate actual joint characteristic, the torque reading displayed on the PTT may vary from the actual torque that a tool will apply to a joint. When critical assemblies are involved, the torque output of the power tool being used should be verified on the actual assembly using a calibrated measuring torque tool.


	Mountz, Inc.


	1080 N. 11th Street


	San Jose, CA 95112


	Phone: (408) 292-2214


	Fax: (408) 292-2733


	©2008 Mountz Inc