Accuracy +/- 2% of reading, +/- 1 digit
Designed for daily screw tightening production environment.
Program pre-set torque.
Rotating head allows viewing of the display from any angle.
Three units of torque measurement available: N.m, lbf.ft, lbf.in
Selection of two operating modes: Track and Peak.
Heavy duty ratchet head.
Go/No Go LED’s and a buzzer can be set for a high or low torque limits.
Four-digit display.
Battery operation (Optional - rechargeable battery adapter kit)
Optional RS-232 serial interface to download torque readings to a PC.
Torque Ranges
Length
Weight
Model | Item # | American | S.I. |
in. | mm | Drive | lbs. | kg. |
RETW250i | 290106 | 25 - 250 lbf.in | 3 - 30 N.m | 15 | 381 | 3/8” Sq. Dr |
2.2 | 0.9 |
RETW100F | 290107 | 10 - 100 lbf.ft | 13.6 - 135.6 N.m | 17 | 431 | 3/8” Sq. Dr | 2.4 | 1.1 |
RETW150F | 290108 | 15 - 150 lbf.ft | 20.3 - 203.3 N.m | 19 | 480 | 1/2” Sq. Dr. | 2.8 | 1.3 |
RETW250F | 290109 | 25 - 250 lbf.ft | 33.9 - 339 N.m |
22 | 550 | 1/2” Sq. Dr. | 3 | 1.4 |
Conventional click wrenches can over torque a fastener. When the set torque is reached, typically a click wrench emits a loud
audible “click”. The operator can feel the impulse from the tool and most break about 3 degree after set torque is reached and then become positive. This positive action can cause over-torque conditions.
With the RETW torque wrench, the operator can see exactly what torque is applied.
Note!
Uses standard AA batteries
Data Sheet
Operation Manual
Accessories
Item # 290114
Model: RS-232 and
Rechargeable Battery Adapter Kit
Description: RS-232 serial interface to download torque readings. Battery charger
