Torque AnalyzersTorque ScrewdriversAssembly Power ToolsTorque WrenchesTorque MultipliersBits, Adapters & ScoketsMountz Home Page Catalog RequestContact UsTechnical SupportCompany Information PageMountz Service & Calibration Services
RTSX-A (Rotary Torque & Angle Transducer)
RTSX-A (Rotary Torque & Angle Transducer)

Certified

Supplied with NIST-Traceable
Certification of Calibration

Accuracy +/-.25% of full scale.

Ability to measure the rotation angle of a fastener. Joint rate & breakaway torque can be measured too.

Angle output: 2-channel quadrature, 360 pulses per rotation.

Bi-directional.

For use with most power tools and rotational measurement applications.

Features “ARC 1” technology, an instant auto-recognition system of the RTSX-A connected to the TorqueMate® Plus.

To view RTSX-A models for the LTT & PTT

ARC 1 units

Torque Ranges

Calibration Stands for Rotary TransducersTorque Analyzers for RTSX-ARTSX-A drawings & dimensionsRTSX-A Data sheet
PTT (Torque & Ange Analyzer)

Model

Item #

American

S.I.

Input Dr.

Output Dr.

RTSX10i-HA

170039

1 - 10 lbf.in

11.3 - 113 c.Nm

1/4” M/Hex

1/4” F/Hex

RTSX10i-A

170038

1 - 10 lbf.in

11.3 - 113 c.Nm

1/4” F/Sq

1/4” M/Sq

RTSX50i-HA

170028

5 - 50 lbf.in

56.5 - 565 c.Nm

1/4” M/Hex

1/4” F/Hex

RTSX50i-A

170026

5 - 50 lbf.in

56.5 - 565 c.Nm

1/4” F/Sq

1/4” M/Sq

RTSX100i-HA

170022

10 - 100 lbf.in

113 - 1130 c.Nm

1/4” M/Hex

1/4” F/Hex

RTSX100i-A

170021

10 - 100 lbf.in

113 - 1130 c.Nm

1/4” F/Sq

1/4” M/Sq

RTSX200i-HA

170029

20 - 200 lbf.in

226 - 2260 c.Nm

1/4” M/Hex

1/4” F/Hex

RTSX200i-A

170023

20 - 200 lbf.in

226 - 2260 c.Nm

1/4” F/Sq

1/4” M/Sq

RTSX50F-A

170024

5 - 50 lbf.ft

6.8 - 67.8 N.m

3/8” F/Sq

3/8” M/Sq

RTSX100F-A

170025

10 - 100 lbf.ft

13.6 - 135.6 N.m

1/2” F/Sq

1/2” M/Sq

RTSX400F-A

170031

40 - 400 lbf.ft

54.2 - 542.4 N.m

3/4” F/Sq

3/4” M/Sq

RTSX800F-A

170032

80 - 800 lbf.ft

108.4 - 1084 N.m

1” F/Sq

1” M/Sq

Warning

WARNING!
Not recommended for impact wrenches.

Cables for connecting a RTSX -A to a torque analyzer

RTSX-A Cable

Item # 065151
For connecting to TorqueMate® Plus

Item # 065157
 For connecting to TorqueMate® 200
 

RTSX-A Pin Connection

Torque Output
 A = Bridge Voltage (+)
B = Bridge Voltage (-)
C = Measured Signal (+)
D = Measured Signal (-)
E = Ground (Angle Voltage)
F = +5V (Angle Voltage)

Angle Output
G = Channel A (Load)
H = Channel B (Lag)
I = N/A
K = 100% Control (Full Scale)

RTSX-A Pin Connection

RTSX-A Transducer - Specifications

Output at Rated Capacity:

Interchanegeability:

Nonlinearity:

Excitation Recommended:

Bridge Resistance:

Usable Temperature Range:

Mating Connector:

Safe Overload

</= 6 Nm [53 lbf.in] rated torque 1 mV/V
 > 6 Nm [53 lbf.in] rated torque 2 mV/V

Matched for mv/v and
shunt calibration +0.3% FS

+0.2% FS

12V DC or AC RMS

350 ohms

41-122 degrees F

Bendix PTO6A-12

125% of rated ouput

Mountz, Inc.

1080 N. 11th Street

San Jose, CA 95112

Phone: (408) 292-2214

Fax: (408) 292-2733

©2006 Mountz Inc