Detects - cross threading, omissions, unfinished rundowns and cycle complete.
Detection of fastening error and buzzer alert. Displays error condition.
Fastener accept and reject lights (Go/No Go).
Visual assembly fastener count (count up or down), including total count.
Measure and program fastening time.
Ability to store multiple fastener settings with the Parameter mode.
Adjustable parameter settings for the buzzer.
Password protection & Wall mountable.
The Scout is powered by the STC30 Plus. It only operates
with this transformer and works with most Mountz electric screwdrivers.
Outputs for machine & PLC interface for line control. Input Features - Cycle Start - Driver Lock - prevents driver activation until PLC input signal
Output Features - Cycle End - OK - NG - Buzzer Alarm
The Scout screw counter prevents costly screw
fastening errors at an affordable price. The Scout learns the characteristics of the assembly (fastener rundown time, tool and type of joint). It detects cross threading, omissions, unfinished rundowns and cycle complete.
The Scout is programmed manually through the keypad. The unit gives the operator audible and visual indications that the assembly has been completed or if it has been rejected. The Scout can interact with a PLC to activate other functions for line control.
Scout Item # 145613 Size (W x L x H) 4 1/2 x 5 x 1 Weight: 0.75 lbs.
STC30 Plus Transformer
The Scout is powered by the STC30 Plus. It
only operates with this transformer and works with most Mountz electric screwdrivers.
PLC Interface Box
Item # 074996 The PLC interface box (mountable) makes it easy to connect the Scout to a PLC system.
(W x L x H) 3 1/4 x 5 1/2 x 1 1/2 Weight: 0.4 lbs. .
Scout Display
Legend
A: Signal In / Out port for PLC B: Numeric LED (for the number of fastening screws) C: Fastening Result (OK or No Good) D: Enter, Left, Right & Menu Keys E: Port for connecting to transformer F: Menu LCD
