Designed and manufactured to meet or exceed the accuracy and repeatability requirements of ISO 6789:2003
(Tools < 10 N.m (+/- 6% of setting):
MTBN2-PR & MTBN10-PR, TSP5/45-PR, TSP10/90-PR
(Tools > 10 N.m are +/- 4% of setting):
MTBN25-PR, MTBN65-PR & MTBN135-PR, TSN25D-PR,
TSN25A-PR, TSN55-PR, TSN125-PR, STB35-PR &
STB70-PR
Push Rod Tools are fitted with a Universal Rotary Switch Module (360 rotating connector prevents twisting or kinking of the cable), which signals when a pre-set torque value is reached.
Signal Output Wrenches can be connected to a Signal Delay Unit (accessory item) to monitor the use of the wrenches as the electrical signal is displayed each time the wrench achieves its pre-set torque value.
Micro-switch contained in internal shock-resistant housing.
Possible use in Production Line Control: Allowing only components with correctly torque fasteners to pass
through a work station. This could be a simple matter of actuating a gate switch or signaling a computer controlled work station.
Counting Function: Count the number of times the torque has been applied - check against finished goods
.
Possible Uses
- Production Line Control: Allowing only components with correctly torque fasteners to pass through a work station. This could be a simple matter of actuating a gate switch or signaling computer controlled work station.
- Counting Function: Count the number of times the torque has been applied – check against finished goods.
Electrical Details
Switch Rating: 100mA 30VDC Max.
100µa 50mVDC Min.
Switch Status: Normally open, closes when preset torque is achieved.
The wrench can be interfaced with computers, counters, or gate switch.
The Push Rod (PR) tools are the common wrench component used for the Signal Output Wrench and the TALS-2 Wireless Wrench. The appropriate Universal Rotary Switch Module or Universal Tool RF Transceiver must be added prior to use.
PR wrenches are designed with a Push Rod connected to the mechanism of the wrench. When the wrench achieves its set torque, the rod makes contact with the microswitch housed within the Rotary Switch Module or RF Transceiver Module.
Signal Output Wrench is comprised of 3 components
Push Rod Wrench
Item # (Select wrench type/model)
Universal Rotary Switch module
Item # 20-B25900
Straight Cable (pictured) Item # 20-D94402
Spiral Cable Item # 20-D94406
Push Rod Wrench Options
TSN Push Rod Wrench
A preset production torque wrench.
Torque Ranges: 2 - 90 lbf.ft
TSP Push Rod Wrench
A preset production torque wrench. Torque Ranges: 10 - 90 lbf.in
STB Push Rod Wrench
A preset wrench compatible with interchangeable heads
Torque Ranges: 5.2 - 51 lbf.ft
MTBN Push Rod Wrench
A preset production wrench. Interchangeable head style.
Torque Ranges: 1.8 - 1195 lbf.in
