TRANSFORMERS (3.9)




		Selectable output voltage: - 20/30V for HIOS & EF Series drivers - 30/38V for K Series drivers Over Heat Protection (OHP) and Over Current Protection (OCP) protect driver from damage or malfunction. Temperature Detection powers down the unit and resets automatically when unit restores to acceptable levels. Switchable 110V & 230V input voltage. Unit will reset itself if motor/current overload is too high. Start & Stop Signal Output (for PLC). Selectable Soft Start (from 0.2-0.6 seconds). Selectable Double Hit Mode for soft joint applications. Screwdriver Lock Signal Input (for PLC). Unit can be connected to the Scout (Screw Counter).

		Specifications: Maximum Output: 3.2A Out Put VDC: 20/30V or 30/38V Input VAC: 110/230V Size inches (W x D x H): 4 3/8” x 7 1/2” x 2 3/8” Weight: 1.7 lbs. Model: STC30 Plus v4.1 Item # 145683 Operates: A-Series, CL-Series, EF-Series, K-Series & BF-Series Model: STC30 Plus v4.1 for SS-Series & ESD-Series Item # 145684


	“sT” button is for activating Soft Start & Double hit modes.




	Select EF Mode (20/30 V) For Operating the following drivers: A-Series: A4500 - A5000 CL-Series: CL2000 - 7000 SS-Series: SS2000- 7000 EF-Series: EF150 - 180 BF-Series: BF080 - 120




	Select K Mode (30/38 V) For Operating the following drivers: K-Series: K150F - 450


	Note! The STC 30 Plus models that are designed with Double Hit Mode and Soft Start mode features are not functional with any BF-Series electric screwdrivers. The Double Hit Mode and Soft Start mode features are built-in to the “Plus” models of the BF-Series electric screwdrivers.


	Operating Instructions for STC30 Plus v4.0

		Operating Instructions for STC30 Plus v3.0


	Operating Instructions for STC30 Plus v2.0

	Operating Instructions for STC30 Plus v1.3

Mountz, Inc.


	1080 N. 11th Street


	San Jose, CA 95112


	Phone: (408) 292-2214


	Fax: (408) 292-2733


	©2007 Mountz Inc