Vacuum adapters kits can be mounted on an electric screwdriver. The screwdriver is fitted with a suction head that holds the screw on the
bit, enabling the operator to pick it up with the tool itself. This is an effective, time saving device that works with most fasteners.
Vacuum Adapter Kits
Mounts easily to BF, EF, BL, CL, SS, A, ESD and VZ-Series drivers.
Accepts different size screws and various length fasteners.
Allows quick-change set-up at a low cost.
Mounts with threaded torque nut. The driver remains externally adjustable while allowing semi-automatic pickup of non-ferrous fasteners.
Plug driver into vacuum supply or chose the Vacuum Ejector.
Mouthpiece and bit purchased separately.
Item # |
Item # | Item # | Item # | Item # | Item #
| Item # |
Fits driver: | Fits driver: | Fits driver: | Fits driver: | Fits driver: | Fits driver: | Fits driver: |
A4500 | A6500 | CL2000 | VZ1820 | BL5000 | BL7000 | BF080 |
A5000 |
CL6000 | SS2000 | VZ3012 |
|
| BF120 |
BL3000 | CL6500 |
| VZ4506 |
|
| EF080 |
CL3000 | CL7000 |
|
|
|
| EF120 |
CL4000 | SS6500 |
|
|
|
|
|
SS3000 | SS7000 |
|
|
|
|
|
SS4000 |
|
|
|
|
|
|
Mouthpieces
(Sold Separately from the Vacuum Adapter Kit)
Standard mouthpieces are manufactured of stainless steel, unless specified. The following items are required for Mountz to design a mouthpiece to fit your application.
Modification Requirements
1. Electric screwdriver model.
2. Torque Setting
3. Drive Size
4. Bit style and length
5. Fastener samples need to be submitted
6. Any special requirements, i.e. space restrictions
Shaker Box
Item # 144301
For electric screwdriver equipped with vacuum adapter.
Manually shake to orientate screw heads up for fast pick-up with a vacuum system.
A
variety of interchangeable grid plates snap in place to fit different size fasteners.
Both the shaker box and the grid plates are made of hard rubber to increase durability.
Item # | American | Metric | Size |
144298 | .047/.055 | 1.2/1.4 | 00 |
144303 | .067 | 1.7 | 0 |
144304 | .078 | 2.0 | 1 |
144299 | .090 | 2.3 | 2 |
144305 | .102 | 2.6 |
3 |
144306 | .118 | 3.0 | 4 |
144307 | .157 | 4.0 | 6 |
Grid Plates
Slot Width
Fastener
A complete kit that converts present shop lines into a vacuum system for fasteners.
The EJECT-TORR is small, light and easier to mount than conventional vacuum pumps.
No vacuum tanks and complicated piping are required.
The EJECT-TORR is vibration-free and produces comparatively little noise.
EJECT-TORR (Vacuum Ejector)
Model: ET-10HR
Nozzle Dia. .038”
Vacuum Flow (SCFM) (0” HG): 0.88
Achieved Vacuum: 26.7
Air Compression (SCFM): 1.60
Weight: 3 oz.
Item # 144314
Vacuum Accessories Data Sheet
