Home › Products › Torque Analyzers & Sensors › Torque Sensors › BLRTSX-RAU Brushless Rotary Torque & Angle Shaft Sensor with Mounting Base

BLRTSX-RAU Brushless Rotary Torque & Angle Shaft Sensor with Mounting Base


+ Enlarge Picture

  

The Mountz brushless rotary torque and angle shaft sensors are design for precision torque testing. Used for a variety automotive applications like starters, alternators, wiper motors, ABS, brakes, clutches, servo steering components, etc. Ideal for motor testings or rotational measurement applications.
  • Non-contact signal transfer and maintenance free.
  • The brushless rotary torque & angle sensor is a compact design & bi-directional.
  • Features a built-in mounting base.
  • Used for a variety automotive applications like starters, alternators, wiper motors, ABS, brakes, clutches, servo steering components, etc.
  • Motor testing, high RPM tools or rotational measurement applications.
  • Angle output: 2-channel quadrature, 360 pulses per rotation.
  • Ability to measure the rotation angle of a fastener. Joint rate & breakaway torque can be measured too.
  • Features ARCII technology, an instant auto-recognition system of the BLRTSX connected to the PTT or LTT.
  • Accuracy ± .2% of full scale*.

Note: * This is the “stand alone” accuracy for the torque sensor.
When the torque sensor is coupled with a Mountz torque tester, the system accuracy is:
Accuracy ± 0.5% of reading from 20% to 100%
Accuracy ± 1% of reading from 10% to 20%.

Torque Ranges

Model Item # American S.I. Input Drive Output Drive
BLRTSX140z-RAU 170276  25 - 140 ozf.in  18 - 98.8 cN.m Shaft  Shaft
BLRTSX18i-RAU 170277  2 - 18 lbf.in  22.5 - 203 cN.m Shaft  Shaft
BLRTSX44i-RAU  170278   4 - 44 lbf.in  45.2 - 497 cN.m  Shaft  Shaft
BLRTSX89i-RAU  170279   10 - 89 lbf.in  113 -1005 cN.m  Shaft  Shaft
BLRTSX177i-RAU  170280  18 - 177 lbf.in  203.4 - 2000 cN.m  Shaft  Shaft
BLRTSX36F-RAU  170281  4 - 36 lbf.ft  5 - 50 N.m  Shaft  Shaft

Certified: Supplied with NIST-Traceable Certification of Calibration

Dimensions

 

BLRTSX-RAU Pin Connection

A = Ground (Shunt Calibration)
B = Angle 1 Speed
C = Torque Output
D = Ground (Torque Output)
E = Ground (Supply)
F = Supply, 11-26 VDC, 1 W
G = Angle 2 (90 running after Angle 1)
H = +5V (Angle Voltage)
K = Shunt Calibration
M = Shield
J & L = N/A

 

Note! For optimum performance, it is recommended to utilize coupling in order to minimize extraneous load & moments due to misalignment. Contact customer service for information.

 

 

Cable Chart

For connecting BLRTSX-RAU to a Torque Analyzer, please select the appropriate cable. 

Torque Analyzer  Item #
PTT or LTT 072001

 

Specifications

BLRTSX-RAU Sensor - Specifications

  • Rated Output: +/- 5VDC +/- 0.2% FS
  • Excitation Recommended: 11VDC to 26VDC (pole secure)
  • Nonlinearity: 0.2% FS
  • Usable Temperature Range 41 to 122 F
  • Mating Connector: Tuchel Series 581 (98-2030-09-12)
  • Safe Overload: 150% of Rated Output