Electric Screwdrivers - PED III & FED III
|
Driver Series Model
| M-Series Driver unit with automatic recognition The M-Series driver units have a forward/reverse with a lever type on/off switch that activates the motor. The M-Series drivers can be connected to both the PEDIII and FEDIII controller and is used in hand operated applications. The M-Series drivers are equipped with a 1/4 female quick-change chuck. The FH model is equipped with a bit cushion mechanism. The bit has a moveable range of 10mm in the axis direction. The driver unit can keep the same bit pressure anywhere within the moveable range. |
 |
|
| S-Series Driver unit with automatic recognition The S-Series driver units have a forward/reverse with a lever type on/off switch that activates the motor. The S-Series drivers can be connected to both the PEDIII and FEDIII controller and is used in hand operated applications. The S-Series drivers are equipped with a 4mm diameter D-Cut quick-change chuck. The FD model is equipped with a bit cushion mechanism. The bit has a moveable range of 10mm in the axis direction. The driver unit can keep the same bit pressure anywhere within the moveable range. |
 |
|
| A-Series Driver unit with automatic recognition The A-Series driver unit's power and direction are controlled by either the PEDIII or the FEDIII controller and are used for automatic applications. The FD and FH models are equipped with a bit cushion mechanism. The bit has a moveable range of 10mm in the axis direction and +/- 1mm (from bit center) in the circumference direction (360). The driver unit can keep the same bit pressure anywhere within the moveable range. |
 |
|
|
Driver #
Fastening Torque Range and RPM
The Systems table shows the torque range for the M-Series (hand operated). The RPM is automatically selected in accordance with the torque value you program in the controller.
Each model has the ability to switch to either standard or high speed using the customized software.
If you require any specific RPM for a certain fastening torque, please feel free to contact a customer service representative. We need to know your specific fastening torque in use, so we can determine if the RPM you require can be achieved.
Torque Ranges (kgf.cm)
| Driver # | Output | Setting | Minimum | Standard Speed RPM |
High Speed RPM |
| 1200 | 0.3 - 1.2 | 0.24 - 1.35 | 0.01 | 350- 1300 | - |
| 2200 | 0.5 - 2.2 | 0.5 - 2.4 | 0.02 | 130 - 750 | - |
| 3600 | 1.0 - 3.6 | 0.8 - 4.0 | 0.02 | 160 -540 | 270 -780 |
| 8500 | 2.0 - 8.5 | 1.0 -10.0 | 0.1 | 60 -320 | 100 - 650 |
| 12K | 3.0 - 12 | 2.7 - 13.0 | 0.1 | 40 - 160 | 150 - 500 |
| 15K | 4.0 - 15 | 3.5 - 16.5 | 0.1 | 30 -100 | 150 - 450 |
| 20K | 5.0 - 20 | 4.5 - 22.0 | 0.1 | 25 - 110 | 60 - 250 |
| 30K** | 7.0 -30 | 7.0 - 30 | 0.1 | 25 -110 | 40 - 160 |
**Not offered in M-Series
Models are available with torque range in lbf.in
|
|
Driver Series
| M | S | A | Description | Drive Size | Driver # |
| SD | - | - | w/o Bit Cushion | 4mm Dia, D-Cut | 1200, 3600, 8500, 12K |
| FD | - | - | with Bit Cushion | 4mm Dia, D-Cut | 1200, 3600, 8500, 12K |
| SH | - | - | w/o Bit Cushion | 1/4" F/Hex | 8500, 12K, 15K, 20K |
| FH | - | - | with Bit Cushion | 1/4" F/Hex | 8500, 12K, 15K, 20K |
| - | SD | SD | w/o Bit Cushion | 4mm Dia, D-Cut | 1200, 2200, 3600, 8500, 12K |
| - | FD | FD | with Bit Cushion | 4mm Dia, D-Cut | 1200, 2200, 3600, 8500, 12K |
| - | - | SH | w/o Bit Cushion | 1/4" F/Hex | 8500, 12K, 15K, 20K, 30K |
| - | - | FH | with Bit Cushion | 1/4" F/Hex | 8500, 12K, 15K, 20K, 30K |
|
|
|
Bit Sleeve & Guide |
 |
 |
||
| Bit Sleeve | Bit Guide |
