Torque Products by Application

Service & Support

Mountz Torque Newsletter

HD-Series Hybrid Controllers

HDC40i CONTROLLER
Model: HDC40i Hybrid Controller
Item # 145740
For driver models: HD150, HD220 & HD450
For more details on electric screwdriver models

HDC30i CONTROLLER
Model: HDC30i Hybrid Controller
Item # 145739
For driver models: HD025, HD035, HD045, HD060 & HD080
For more details on electric screwdriver models

GENERAL SPECIFICATIONS
(Both Controllers)

Input (Air Pressure):
Min 4.5 Bar (62.26 PSI) / Max 6 Bar (87 PSI)
Angle Control: 0.1 - 10 turns
Preset Parameters:
Torque, Speed, Soft Start & Angle in 8 preset numbers
Auto detection of the connected driver: Auto detection of the offset value from the EEProm on the driver
Error display: Error display by code no. in system, communication & pattern error group
Fastening Quality Control: OK/NG monitoring of screw fastening by preset pattern of angle and/or time.
Screw Counter: Save the total screw number, and monitoring the number of OK fastening screws. The controllers can be “Daisy Chained” together for screw counting in a master/slave scenario.
PC based program for parameter settings, monitoring and real time output

HDC30i SPECIFICATIONS

Input (Electric): AC120VC
Output (Electric): DC30V, 2A
Fuse: AC250V 3.15A
Dimension (WxLxH): 3 1/2" x 7 1/8" x 5"
Weight: 3.5 lbs
Preset selection capability: Front panel or 25P I/O

HDC40i SPECIFICATIONS

Input (Electric): AC120VC
Output (Electric): DC40V, 3A
Fuse: AC250V 10A
Dimension (WxLxH): 3 3/4" x 8 3/4" x 5"
Weight: 4.6 lbs
Preset selection capability: Front panel or 25P I/O

Note!
The HDC40i & HDC30i Hybrid Controllers require a constant PSI regulation. Should be used with MAC-20 mini air compressor.



Cable 6 ft. (RS232 to USB Type A) Item # 145780	USB cable for connecting Controller to PC. Item # 770319	Cable 25 Pin I/O (Male-Male) Item # 145760