STC 40 Transformer


  

 
  • Over Heat Protection (OHP) and Over Current Protection (OCP) protect driver from damage or malfunction.
  • Temperature Detection powers down the unit and resets automatically when unit restores to acceptable levels.
  • Switchable 110V & 230V input voltage. Unit will reset itself if motor/current overload is too high.
  • Start & Stop Signal Output (for PLC).
  • Screwdriver Lock Signal Input (for PLC).
  • Unit can be connected to the Scout (Screw Counter).

 

Specifications:
Rated Output: 2.6A  105W
Max. Output: 10A
Output VDC: 30/40V
Input VAC: 110/230V
Size inches (W x D x H): 4 3/8” x 7 1/2” x 2 3/8”
Weight: 1.8 lbs.

Model: STC40 for BF-Series and NF-Series
Item # 145754

 

 

 
 Item # 145774

The Program Lock Key protects from incidental or operator tampering of the programmable settings on the side of select NF-Series models* (V3 models only). To adjust the settings the Program Lock Key must be is plugged into the STC40 Transformer.

* Note! The program key is required for the NF-Series Standard Models and Soft Stop Models. RPM & Soft Start Settings cannot be adjusted without it.

The program Key cannot be used with NF-Series Standard Plus Models, and  Angle & Auto Reverse Models.