Setting Adapters for Weld Stud Test Tool
|
Get Easy Test Results A simple way to test the shear torque of weld studs. Apply a straight pull of the WSTT wrench (no side load). When the wrench breaks-over and the weld stud is still attached then it passed. If the weld stud breaks off - then it failed. |
Setting Adapters
 |
Setting Adapter The setting adapter is used for setting the torque of the WSTT with a torque analyzer. The Setting Adapter features a 3/8” square drive on one side. The other end features a blank end so you can weld the appropriate weld stud. |
Pin Setting Adapters
The pin setting adapter is used for setting the torque of the WSTT with a torque analyzer. The system comprises of two components:
1) WSTT Setting Adapter - Item #061461
Adapter with 1/4 male square drive and a pinmounting hole, which accepts a variety of pin sizes.
2) Select pin size for the End Fitting on the WSTT:
| For American End Fittings | ||||||||||||||||||||||||||||||||||||
  |
|
|
