Home › Products › Torque Analyzers & Sensors › Torque Sensors › RTSX-A Rotary Torque & Angle Sensor

RTSX-A Rotary Torque & Angle Sensor

RTSX-A Torque Sensor
+ Enlarge Picture

  

The Rotary Torque & Angle Sensor is the ideal torque-auditing tool for testing the actual torque being applied on the assembly application. By connecting a rotary torque sensor between an electric or pneumatic tool and assembly application, you can monitor the torque being applied from the tool to fastener or bolt.

Accuracy ± .25% of full scale.
  • Ability to measure the rotation angle of a fastener. Joint rate & breakaway torque can be measured too.
  • Angle output: 2-channel quadrature, 360 pulses per rotation.
  • Bi-directional.
  • For use with most power tools and rotational measurement applications.
  • Features “ARC II” technology, an instant auto-recognition system of the RTSX-A connected to the PTT and LTT.

Torque Ranges

Model Item # American S.I. Input Drive Output Drive
RTSX10i-HA 170213  1 - 10 lbf.in  11.3 - 113 cN.m 1/4 M/Hex  1/4 F/Hex
RTSX10i-A 170214  1 - 10 lbf.in  11.3 - 113 cN.m 1/4 F/Sq  1/4 M/Sq
RTSX50i-HA 170215  5 -50 lbf.in  56.5 - 565 cN.m 1/4 M/Hex  1/4 F/Hex
RTSX50i-A 170216  5 -50 lbf.in  56.5 - 565 cN.m 1/4 F/Sq  1/4 M/Sq
RTSX100i-HA  170217   10 - 100 lbf.in  113 - 1130 cN.m  1/4 M/Hex  1/4 F/Hex
RTSX100i-A  170218   10 - 100 lbf.in  113 - 1130 cN.m  1/4 F/Sq  1/4 M/Sq
RTSX200i-HA  170219   20 - 200 lbf.in  226 - 2260 cN.m  1/4 M/Hex  1/4 F/Hex
RTSX200i-A  170220   20 - 200 lbf.in  226 - 2260 cN.m  1/4 F/Sq  1/4 M/Sq
RTSX50F-A  170221  5 - 50 lbf.ft  6.8 - 67.8 N.m  3/8 F/Sq  3/8 M/Sq
RTSX100F-A  170222  10 - 100 lbf.ft  13.6 - 135.6 N.m  1/2 F/Sq  1/2 M/Sq
RTSX400F-A  170223  40 - 400 lbf.ft  54.2 - 542.4 N.m  3/4 F/Sq  3/4 M/Sq
RTSX800F-A  170224  80 - 800 lbf.ft  108.4 - 1084 N.m  1 F/Sq  1 M/Sq
RTSX1500F-A   170282  150 - 1500 lbf.ft  203.3 - 2033 N.m  1 1/2 F/Sq 1 1/2 M/Sq

Certified: Supplied with NIST-Traceable Certification of Calibration

Dimensions

 

RTSX-A Pin Connection

Torque Output
A = Bridge Voltage (+)
B = Bridge Voltage (-)
C = Measured Signal (+)
D = Measured Signal (-)
E = Ground (Angle Voltage)
F = +5V (Angle Voltage)

Angle Output
G = Channel A (Load)
H = Channel B (Lag)
I = N/A
K = 100% Control (Full Scale)

 

WARNING! Not recommended for impact wrenches.

Cable Chart

For connecting RTSX-A to a Torque Analyzer, please select the appropriate cable. 

Torque Analyzer  Item #
PTT or LTT 072000

 

Data Sheet

  • RTSX-A Data sheet

    • Specifications

    RTSX-A Sensor - Specifications

    • Output at Rated Capacity:
      </= 6 Nm [53 lbf.in] rated torque 1 mV/V
      > 6 Nm [53 lbf.in] rated torque 2 mV/V
    • Interchanegeability: Matched for mv/v and shunt calibration +0.3% FS
    • Nonlinearity: +0.2% FS
    • Excitation Recommended: 12V DC or AC RMS
    • Bridge Resistance: 350 ohms
    • Usable Temperature Range: 41-122 degrees F
    • Mating Connector: Bendix PTO6A-12
    • Safe Overload: 125% of rated ouput