STC30 Plus Transformer for SS-Series

Item #: 145684
Certifications:
$335.00

This tool typically ships within 3 -4 weeks. For further information, call 408-684-1442.

The STC 30 Plus (for SS-Series) is a power supply that is designed to operate with the HIOS SS-Series electric screwdriv READ MORE

Specs

Model:
STC30 Plus for SS-Series
Item #:
145684
Tool Weight:
1.8 lbs.
Tool Length:
7.5
Tool Width:
4.375
Tool Height:
2.375
Rated Output:
2.5A
Maximum Output:
5A
Output VDC:
20/30V or 30/38V
Input VAC:
110/230V
Fuse Size:
6.3A
The STC 30 Plus (for SS-Series) is a power supply that is designed to operate with the HIOS SS-Series electric screwdrivers. It is a single tool controller that is designed to operate at both 110v and 230v. Switchable output voltage provides two selectable speed options for the screwdrivers. The unit is can connect with the Scout screw counting system.

Related Products

    • Operates with SS-Serieselectric screwdrivers
    • Selectable output voltage
    • Over Heat Protection (OHP) and Over Current Protection (OCP) protect drivers from damage or malfunction.
    • Temperature Detection powers down the unit and resets automatically when the unit restores to acceptable levels.
    • Switchable 110V & 230V input voltage. The unit will reset itself if motor/current overload is too high
    • Start & Stop Signal Output (for PLC).
    • Selectable Soft-Start time (from 0.2-0.6 seconds).
    • Selectable Double Hit Mode for soft joint applications.
    • Screwdriver Lock Signal Input (for PLC).
    • The unit can be connected to the Scout Screw Counter.
Operates with Electric Screwdriver Model: SS-Series