MD2601-A Electric Screwdriver

Item #: 310005
Certifications:

This tool typically ships within 4 - 5 weeks.

The MD2601-A electric screwdriver features a high-performance Swiss DC servo motor design that provides consistently rep READ MORE
Request a Quote

Specs

Model:
MD2601-A
Item #:
310005
Drive Size:
1/4" F/Hex
American:
0.26 - 3.4 lbf.in
S.I.:
2.9 - 38.4 cN.m
Metric:
0.3 - 4 kgf.cm
Tool Weight:
1 lb.
Tool Length:
9
Minimum Adjustable RPM Range:
150
Maximum Adjustable RPM Range:
2000
Grip Dia:
1 1/2"
The MD2601-A electric screwdriver features a high-performance Swiss DC servo motor design that provides consistently repeatable process control and eliminates potential variations. These electric torque screwdrivers are engineered for automation assembly applications that provide manufacturers with a rapid, reliable, and precise method of fastening screws. The high-performance torque fastening system allows manufacturers to optimize the assembly area, reduce labor costs, and increase productivity. Multiple fastening strategies can be implemented for sensitive and/or difficult assembly joints. The system increases productivity as one tool can be programmed to do the job of multiple conventional tools; saving time, maintenance cost, space, and training. The tool operates only with the MDC-26 controllers.

Accessories

Set-Up:

  • Requires MDC Controller.
  • Drive Adapter: This adapter changes the bit drive socket configuration from a ¼” drive to a 4mm HIOS drive or vice versa.
  • I/O Cable for connecting the MDC Controller to the 44P I/O Wiring Box device.

Error-Proofing & Process Improvement:

  • Bit Socket Tray: An error-proofing solution minimizes the risk of errors by automatically selecting the correct torque according to the socket or bit selected. It connects to the MDC-22 mini controller. It will improve productivity and reduce operator errors. Saves downtime by automatically changing program settings for multiple fastening strategies.
  • Position Control Torque Arms: Equipped with position encoders, the position control torque arm is an error-proofing system that detects and eliminates costly screw-fastening errors during the assembly process. The poka-yoke system reduces the risks of improperly fastening screws, ensuring that every screw is correctly tightened in the correct sequence.
  • Screw Presenter: Deliver up to two screws per second to a fixed point where a human or robotic operator picks them up, cutting production time in half.
  • Mag-O-Nets: Magnetize a bit by sliding the Mag-O-Net onto the bit—commonly used with a screw presenter.
  • Vacuum Adapter: The kit is mounted on an electric screwdriver with a suction head that holds the screw on the bit, enabling the operator to pick it up with the tool. This effective, time-saving device works with most fasteners—commonly used with a screw presenter.

Ergonomics:

  • Tool Balancers: Provides easy handling for operators that work with power tools for long, continuous hours. A balancer enables a tool to be positioned over the workstation and helps workers avoid fatigue which can lead to low productivity, mistakes, and injuries.
  • Ergonomic Torque Arms: Providing ergonomic solutions for your assembly line workers lessens fatigue, prevents injuries, and boosts productivity. Torque arm absorbs the torque reaction generated by a power tool. Mountz offers various arm configurations for flexible and mobile workstation designs. The ergonomic torque arms improve employee safety.
  • Tool Stand: Prevent damage to power tools from dropping. Convenient tool positioning - adjust both vertically and horizontally.

Service & Calibration:

  • Torque Analyzers & Sensors: If torque tools slip out of calibration, that could impact the quality of your products. Having an accurate way to test calibration onsite regularly is a great way to reduce risk. With Mountz torque analyzers and sensors, you can test tools before they go into service daily or weekly.
  • Run-Down Adapters: It is used when testing power tools with a torque analyzer or sensor. The run-down adapter (RDA) is designed to provide consistent and reliable torque readings for power-driven torque control tools. An RDA reduces the impact and irregular peaks that cause poor repeatability. The device is mounted in-line between the tool drive and the transducer.
  • Prepaid Calibration Vouchers: Book service and maintenance in advance to ensure your tools are always in top condition and ready to use. Add this service to any tooling purchase.

    MDC Controller:

    • Color LCD touch-screen provides an intuitive interface - quickly program and select fastening parameters.
    • Digital I/O signals for interfacing with a machine & PLC interface for line control monitoring techniques.
    • Program up to 15 presets and 15 models, consisting of up to 20 steps for each model.
    • Collect and save all fastening data on SD memory card.
    • Controller provides visibility into the fastening process with torque data analysis. (Real-time torque data and curve display. Perform analytics with Standard Deviation, Mean, Average, CP, CPK ).
    • Controller features a built-in stand, which can fold up snugly to the controller and mounted on the wall.
      Free product (ParaMon) PC software — no annual licensing required — savings of $2K.

    Error-Proofing:

    • Error-proof the fastening process and eliminate manufacturing risks and prevent product defects.
    • The EZ-Glider position control torque arm is an error-proofing system that detects and eliminates costly screw-fastening errors and ensures that every screw is correctly tightened in the correct sequence. Paired with MD-Series smart screwdrivers, the torque arm adds an extra layer of error-proofing to the fastening process.

    Process Optimization:

    • Suitable for micro and low torque applications.
    • Achieve multiple fastening tasks with one screwdriver system. A single fastening system can replace up to 15 power tools.
    • Digital I/O allows interfacing with a machine & PLC interface for line control monitoring techniques.
    • Programmable fastening sequences and workflows. Create standardized fastening workflows. Program up to 15 presets and 15 models, consisting of up to 20 steps for each model.
    • Monitor fastening quality with the screw counting process. The built-in function counts the number of screws delivered and detects cross-threading, omissions, and unfinished rundowns.

    Data Collection and Analysis:

    • Data collection - record and store torque and fastening data. SD Card data memory slot (memory card included).
    • Collect and store essential quality data in a repository for data analytics, regulatory compliance, and traceability.
    • Review torque curves and make adjustments to controller parameters

    Mountz Quality Standards:

    • Low maintenance with an extended life cycle.
    • Swiss DC servo motor provides precise, accurate, and repeatable torque control.
    • Low inertial force provides smooth reaction-less operation with little G force to assembled parts.

    Tool Packaging Includes

    • Power tool table (3 meter length)
    • Tool hanger hook
    • Tool calibration report
The MD electric screwdriver is supplied with the standard 3 meter length cable. The driver cable connects the MD-Series electric screwdriver to the MDC-26 controller

Download the Mountz vacuum system request form and submit with your request